source and allow the machine to stop. Disconnect the
machine from the supply and take the following steps
before restarting and operating the machine:
inspect for damage;
replace or repair any damaged parts;
Check for and tighten any loose parts.
h) Do not allow processed material to build up in the
discharge zone; this may prevent proper discharge
and can result in kickback of material through the
intake opening.
i) If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply
before cleaning
debris
.
j) Never operate the machine with defective
guards
or
shields, or without safety devices, for example
debris
collector
in place.
k)Keep the power source clean of debris and other
accumulations to prevent damage to the power
source or possible fire.
l) Do not transport this machine while the power source
is running.
m) Stop the machine, and remove plug from the socket.
Make sure that all moving parts have come to a
complete stop
whenever you leave the machine,
before clearing blockages or unclogging chute,
Before checking, cleaning or working on the
machine.
n) Do not tilt the machine while the power source is
running.
05
