Racing RAC3000, Инструкция по эксплуатации

Страница: 22 / 29

22
The gap should be: 0.70-0.80 mm (0.028-0.031 in).
6) Check that the spark plug washer is in good condition, and thread the spark plug in by hand to
prevent cross-threading.
7) After the spark plug is seated, tighten with a spark plug wrench to compress the washer. If
installing a new spark plug, tighten I/2 turn after the spark plug seats to compress the washer. If
reinstalling a used spark plug, tighten I/8 -1/4 turn after the spark plug seats to compress the
washer.
NOTICE
The spark plug must be securely tightened. An improperly tightened spark plug can
become very hot and could damage the engine. Never use spark plugs which have an
improper heat range. Use only the recommended spark plugs or equivalent.
8. TRANSPORTING/STORAGE
When transporting the generator, turn the engine switch and the fuel valve OFF. Keep the
generator level to prevent fuel spillage. Fuel vapor or spilled fuel may ignite.
Not turn the machine to any side, and keep the machine under horizontal position during the
transporting process.
WARNING
Contact with a hot engine or exhaust system can cause serious bums or fires. Let the
engine cool before transporting or storing the generator.
Take care not to drop or strike the generator when transporting. Do not place heavy objects on the
generator.
Before storing the unit for an extended period:
• Be sure the storage area is free of excessive humidity and dust.
• Service according to the table below:
STORAGE TIME RECOMMENDED SERVICE PROCEDURE TO PREVENT HARD STARTING