
Instruction handbook
Comprehensive instructions and information on all aspects of maintenance and safe use of the machine shall
be provided in the instruction handbook. It shall comply with 5.5 of EN 292-2:1991. In particular, the
following points shall be emphasised;
a)
That the machine shall always be used in accordance with the manufacturer’s instructions laid down in
the instruction handbook;
b)
The engine shall be stopped when carrying out maintenance and cleaning operations, when changing
tools and when being transported by means other than under its own power;
c)
Information on the hazards when working on slopes and the precautions to take;
d)
Information on the special hazards when working on difficult soil (stony, hard, etc.);
e)
That the adjustable part of the protective device shall be adjusted to the working depth of the tool so that
only that part of the working tool that cuts into the soil remains uncovered. This does not apply to motor
hoes;
f)
The sound pressure and power levels measured according to prEN 1553:1996;
g)
The level of vibrations on handlebar grips measured according to EN 1033:1995;
h)
Recommendations for starting up under normal conditions and, if necessary, for the auxiliary or
secondary starting device;
i)
That the machine should only be operated by suitably trained persons;
j)
That during the operation of the machine safety shoes should be worn;
k)
Information regarding the holding points which allow the machine to be handled.
An example of complete safety instructions follows:
The following good practices should be sated as appropriate;
1)
Training
a)
Read the instructions carefully. Be familiar with the controls and the proper use of the equipment;
b)
Never allow children or people unfamiliar with these instructions to use the machine. Local regulations
can restrict the age of the operator;
c)
Never work while people, especially children, or pets are nearby;
d)
Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or
their property.
2)
Preparation
a)
While working, always wear substantial footwear and long trousers. Do not operate the equipment when
barefoot or wearing open sandals;
Содержание RAC139PTIL-A
Страница 8: ...2 ASSEMBLY OF HANDLE Used for cutting 590mm...
Страница 9: ...3 BLADE ASSEMBLY Cutting width 360mm R L Cutting width 590mm...
Страница 17: ...9 EXPLODED DIAGRAM...