18
Recipes
(Cont.)
This recipe has been specially created
by Rachael Ray for this appliance.
GREEN WRAPS WITH WHITE BEAN HUMMUS
2 (15 ounce) cans cannelloni beans, drained and rinsed
4 stems fresh rosemary, leaves stripped from stem
2 cloves garlic, popped from skin
3-4 tablespoons EVOO - extra virgin olive oil, eyeball it
Black pepper, to your taste
4 firm vine-ripened tomatoes, thinly sliced
1/2 seedless cucumber, thinly sliced
1/2 red onion, thinly sliced
A couple handfuls pitted Kalamata olives
A couple of handfuls chopped fresh flat-leaf parsley
1/2 pound mixed greens
2 lemons
EVOO - extra virgin olive oil
Coarse salt, to taste
1/2 pound feta cheese, crumbled
8 large pita breads, or flour tortilla wraps, or flavored wraps
Combine beans, rosemary, garlic, EVOO, and black pepper in processor.
Pulse until mixture is smooth.
Combine tomatoes, cucumber, onion, olives, parsley, greens, and the
juice of lemons in a bowl. Drizzle with olive oil, and sprinkle with salt.
Combine well.
Warm pitas or wraps in microwave oven or on a griddle pan. Spread with
a generous dose of white bean hummus. Top with a layer of Greek salad
mixture. Sprinkle with Feta cheese crumbles and roll. Wrap lower half of
wraps with foil or waxed paper to keep it together while you eat your way
down. Keep a paper towel in your hand as you eat to catch any drips.
Batches of white bean spread are also a terrific dip for specialty chips,
celery, or bread sticks.
Yield:
8 wraps
7
Before First Use
WARNING: Blade Attachments are very sharp. Use extreme care
when handling Blades. Failure to do so can result in personal
injury.
1. Carefully unpack the Food Processor and wash the Processing Bowl,
Cover with Feed Chute, Food Pusher, Spatula and attachments in
warm soapy water. Rinse and dry thoroughly.
2. Wipe the Food Processor Power Base with a soft, moistened cloth.
Never immerse the Food Processor Power Base in water or any
other liquid.
Assembly Instructions
1. Before assembling the Food
Processor ensure that the Cord is
unplugged.
2. Place the Food Processor Power
Base facing you on a dry, level sur-
face.
3. Place the Processing Bowl onto the
Power Base. The Bowl will only sit
correctly when the handle is posi-
tioned to the left at the ten o'clock
position.
4. Turn the Processing Bowl counter
clockwise to engage the locking tabs
and the Power Base Interlock
Mechanism.
5. Determine which processing blade is
to be used; Chopping, Shredding or
Slicing. If shredding or slicing, insert
the appropriate blade into the top
side of the Blade Holder, making sure
it snaps in place. See illustration.
