18
Handle
-
Install the front handle as shown in the image. Do not fix the screws until you have set the most
comfortable working position.
Tube
-
Install the desired tube on the bar of the main unit. Make sure the locking pin is inserted into the hole in
the bar.
-
Fasten the bar by turning the nut counterclockwise.
Carter of protection (brushcutter and grass trimmer)
-
Remove the two screws from the guard.
-
On the brushcutter / lawnmower tube, place the protective cover on its support.
-
Screw the protective cover with the two screws.
