background image

12 

 

condition.  These  symptoms  usually  appear  on  the  fingers,  hands  or  wrists.  Risk  increases  at  low 
temperatures 

Inhalation of particles 

Inhalation of exhaust gases  

Unattended projections 

Contact with foreign objects 

Contact with the tool in operation 

Hearing loss in the absence of correct hearing protection 

 
To  minimize  those  risks,  follow  the  instructions  of  this  manual  about  wearing  personal  equipment  of  protection, 
take some rest during the operation and the manipulation of the tool. Do not work for a prolonged time.  

 

Intended use 
1)  Brushcutter and grass trimmer 

This machine can be used as a grass trimmer with the sharp nylon line, and as a brush cutter with the 
cutting blade. When using the machine with the sharp nylon line, use it strictly and only as a trimmer to 
cut grass or loose weeds. 
When using the machine with the cutting blade, use it only as a brush cutter, to cut tough grass, denser 
weeds as well as small branches with a maximum diameter of 10mm. 
This  machine  is  not  intended  for  cutting  bushes  or  other  similar  plants  that  require  the  machine  or 
cutting tool to be lifted off the ground. 
Do not use this tool to work with other materials such as stones, clay soils, etc. 

 

2)  Mounted pole pruner 

The  pole  pruner  is  exclusively  intended  for  pruning  trees  and/or  cutting  small  wood  from  the  ground. 
Any other use is considered improper and will damage the tool.

 

The  correct  use  also  includes  reading  and  observing  the  instructions  for  use  at  each  use  as  well  as 
observing the warnings fixed on the machine. Before and during use, it is imperative to check the blade 
to  ensure  that  there  is  no  mechanical  damage.  In  case  of  necessary  repairs,  please  contact  your 
specialist dealer.

 

Only  the  use  of  spare  parts  approved  by  the  manufacturer  or  original  spare  parts  is  permitted.  If 
unauthorized or non-original spare parts are used, the user is liable for consequential injury to persons 
or property resulting in the manufacturer being deprived of all liability. 

 

3)  Hedge trimmer  

Your  hedge  trimmer  is  a  device  used  by  a  person  to  trim  hedges  and  shrubs  by  working  with  one  or 
more  blades  arranged  linearly  and  back  and  forth.  A  potential  hazard  exists  if  the  device  is  used  for 
other purposes. Improper handling of the hedge trimmer increases the risk of injury from blades. Only 
the use of spare parts and accessories approved by the manufacturer is permitted.

 

Symbols 

 Read instructions manual  

 Wear protective equipment: hearing protection, eye protection, and helmet 

Wear protection gloves 

Содержание RACCOMBID314T


































Отзывы: