This option will fix the current reference lap. When fixed, the stored reference lap will not update if a faster lap is
achieved. If there is no stored reference lap, the next complete lap will be used as the fixed reference lap. Alternatively,
you can fix the reference lap by
triple tapping
on the
Main Lap Timing Screen
. If triple tapping, a cancel timeout
screen will display, allowing you to cancel the fixing within 5 seconds by pressing the screen.
When a reference lap has been fixed, a padlock icon will show to the right of the reference lap on the
Main Lap Timing
Screen
.
To unfix a reference lap, select
Enabled.
Alternatively, you can also unfix the reference lap by triple tapping on the
Main
Lap Timing Screen
. If triple tapping, a cancel timeout screen will display, allowing you to cancel the unfixing within 5
seconds by pressing the screen.
Reference Lap
Load a Reference Lap
You can load a previously saved or provided reference lap by pressing the
Load
button (as long as the unit is not
logging and the vehicle is not moving). If an SD card is detected, the unit will display all
.ref
files located within the
REF
LAPS
folder on the SD card. Select a file and then press the
Confirm Button
on the bottom right of the screen, or press the
Cancel Button
on the bottom left of the screen to return the Settings screen without saving
If confirmed, a load success screen will briefly display to show that it was loaded successfully.
If there are splits stored within the file, these will also be uploaded to the unit, up to a maximum of 10 gates/splits.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V2/
User_Guide_%E2%80%93_VBOX_Touch_V2/05_Display_Modes_%E2%80%93_VBOX_Touch_V2/VBOX_Touch_V2_-
_Lap_Timing_Mode
67
