02 - MFD Test screens
Pre-set test screens
The eight pre-set test screens allow the user to set up eight individual test profiles that can be accessed directly and
quickly when testing a vehicle. The test that is displayed on the screen will be the test that is being conducted. At the
end of each test the time and distance for the test is displayed and printed on a thermal printer if connected. The results
of the test are also output on the CAN bus.
When you scroll to a new test the test name and start and end conditions are momentarily displayed, then the screen
shows three parameters, Velocity, Time and Distance.
Pre test setup
From any one of the eight Pre-set Test screens press OK to enter the Set up screens for the Pre-set test.
Press OK to clear the current results of this Pre-set test.
Press OK to clear the results from all of the Pre-set
tests.
Press OK to print all of the results from all of the Pre-set
tests on a Thermal Printer connected to the serial port of
the MFD.
Press OK to enter the general Pre-set test setup
screens.
https://racelogic.support/01VBOX_Automotive/06Displays/Multi-Function_Display_(MFD)/
5
