Target Set-Up Menu
Press OK to change the target parameter. Press the
right arrow key to choose parameter group, once
selected, arrow keys will cycle through list. Press OK to
store the setting for the target parameter.
Here the target buzzer can be turned on or off. The
target buzzer sounds when the target screen is shown
and the target value is exceeded. The further the value
goes over the target the louder the buzzer becomes.
To set, use the arrow keys to set each digit and the OK
key to move onto the next digit. To set a negative value
the ‘-‘sign must be in the left most digit.
Set using same method as target minimum. The target
value will be at 50% of the full scale. I.e. if a minimum
value of 0 is entered and a target value of 20, the
maximum value will auto set to 40.
Lap Timing Menu
The setup method is the same as the other screens
except from here you can only select
.
In lap setup, start/finish and split lines can be set. Use
the arrow keys to scroll to which line you wish to set,
drive over the line position and press OK.
To view lap times, press OK. Use arrow keys to move
through the list. When the start / finish line is crossed, a
new lap is stored. Lap times are saved when the MFD is
turned off. Power up resets the lap counter to lap 1, so
any previously stored times will be overwritten when new
laps are completed.
https://racelogic.support/01VBOX_Automotive/06Displays/Multi-Function_Display_(MFD)/
14
