8
9
smart Repeater
Smart Repeater mode is started by changing “Display Mode” in
settings
on the a10
app to “Repeater”.
In smart repeater mode the d10 acts as a repeater displaying either internal sensor data
from the d10 and connected sensors or NMEA data streamed over a connected or
WiFi network.
There are 4 pages that can each have 2 sets of data saved for display. You can also use
the Timer and Distance to Line functionality in Smart Repeater mode.
Starting/Stopping Timer and Grabbing Pin and Boat are controlled only by the a10
app when in Smart Repeater Mode.
d10 overview
Introduction
The d10 is designed to provide you the information you need, when you need it.
The display layout consists of four elements: Top Digits, Middle Digits, Graphic
Display and Touch Controls as shown in the illustration below.
The d10 operates in two basic modes: Smart Repeater and Tactical Compass.
Modes are changed using the a10 app and changing “Display Mode” in
settings
.
See
App Layout
for more info on using the a10 app with the d10.
Top Digits
Middle Digits
Graphic Display
“fred”
Left Arrow
Right Arrow
circle
square
Touch controls
d10 Layout
Introduction
“fred”
•
Open context menu
Left Arrow
•
Change display page
Right Arrow
•
Change display page
circle
•
Change top data
source
square
•
Change bottom data
source