
30
31
Tide/current
Tide/current
When a paddlewheel is connected to the d10 it can provide you with tide/current
speeds using the difference in speed between the GPS and the Paddlewheel.
Press
set SOG and STW difference to zero for current conditions. This gives
a zero baseline for any changes in tide/current from this point forward. To reset
open Menu
Decrease offset
Increase offset
select Depth offset
Depth sensor offset
Sensor offset above keel in centimeters and can be set from the d10 or via the app.
From the app in the Tide-Depth page:
The Navigation page can be accessed by touching the left or
right arrows in the touch controls until the graphic display
shows “NAVIGATION” in large text.
The page name displays for 2 seconds before the Graphic
Display reverts to active mode.
The Navigation page provides: Boat Speed, Turning Angle,
Heading, Distance To Mark, Time To Mark, Course Over
Ground.
The Navigation page has two different display modes. To
change the mode touch
If Auto Switch is set to yes in the d10 Settings on the a10 App - when the boat turns
downwind (below 80° of the mean wind direction) the d10 automatically changes to
the Navigation page.
navigation overview
Distance Mode
Turning Angle
Boat Speed
Heading and Distance To Mark
Time Mode
Turning Angle
Boat Speed
Heading and Time To Mark
o
peration - Tide/Depth
o
peration -
n
avigation