3-8 Servicing the Mainframe
Chapter 3
Replacing the Front
Panel Tapped Strip
This section gives guidelines to replace the Front Panel Tapped Strip.
1 Turn off the mainframe and remove the AC power cord.
2 If the mainframe is rack-mounted, remove the mainframe from
the rack and place the mainframe at a static-controlled workstation.
3 Remove mainframe accessory items as required. See "Removing
Mainframe Accessory Items".
4 Remove the mainframe cover. See "Removing the Mainframe Cover".
5 Remove the Front Panel Tapped Strip as shown in Figure 3-6.
6 Install the replacement Front Panel Tapped Strip by reversing the
steps in Figure 3-6.
7 Replace the mainframe cover by reversing the steps in "Removing
the Mainframe Cover".
8 Reinstall mainframe accessory items removed in step 3 OR reinstall
the mainframe in the rack (as required). Reconnect AC power cord.
Figure 3-6. Removing the Front Panel Tapped Strip
Disconnect the
Monitor Cable
1
Remove
T8 Screw
2
3
Screws
Remove 4
4
Slide the Front
Panel Display Out
5
Slide Front Panel Tapped
Strip Out from Front
Panel Display
Содержание 1266
