![background image](http://html1.mh-extra.com/html/racal-instruments/1260-14c/1260-14c_manual_3123631036.webp)
User Manual 1260-14C
Module Specific Syntax 3-13
SETUP BUSY
command
Syntax:
SE[TUP] <address>.BU[SY],POS | NEG
<address>::= Module address of the 1260-14C (1-12)
Description:
This command defines the polarity of the BUSY
handshake line. Setting the polarity to POS causes the BUSY line
to be set HIGH when the 1260-14C is busy processing during
synchronous operation. Setting the polarity to NEG causes the
BUSY line to be set LOW when the module is busy. The default
power-up condition is POS.
NOTE
The BUSY line is only valid when synchronous
operations are defined and armed. Spurious signals
at other times should be ignored by the user.
Example:
This command sets the polarity of the BUSY signal to negative
within the module at address 2.
SETUP 2.BUSY,NEG
SETUP CLKIN
command
Syntax:
SE[TUP] <address>.CL[KIN],POS | NEG
<address>::= Module address of the 1260-14C (1-12)
Description:
This command defines the active edge of the
CLKIN handshake signal. Setting CLKIN to POS causes the
module to trigger on the positive (or rising) edge of the CLKIN
signal. Setting the polarity to NEG causes the module to trigger on
the negative (or falling) edge of the CLKIN signal. The default
power-up condition is POS.
NOTE
The CLKIN line is only monitored when synchronous
operations are defined and armed. Spurious signals
at other times will be ignored.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com