User Manual 1260-14C
Installation Instructions 2-1
Chapter 2
INSTALLATION INSTRUCTIONS
Unpacking and
Inspection
1. Before unpacking the 1260-14C, check the exterior of the
shipping carton for any signs of damage. All irregularities
should be noted on the shipping bill.
2. Remove the module from its carton, preserving the factory
packaging as much as possible.
3. Inspect the module for any defect or damage. Immediately
notify the carrier if any damage is apparent.
4. Have a qualified person check the instrument for safety before
use.
CAUTION
Proper ESD handling procedures must always be
used when packing, unpacking or installing any 1260
Series cards. Failure to do so may cause damage to
the unit.
Figure 2-1, 1260-14C
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com