![background image](http://html1.mh-extra.com/html/racal-instruments/1260-00b/1260-00b_user-manual_776024125.webp)
1260-00C User Manual
Local Command Set 4-76
Syntax:
DCISetup? <logical address>,
<Commander's logical address>, <start
block>, <number of blocks>, <stack
size>, [, <Servant1>, [<Servant2>,...,
<ServantN>]]
The
DCISetup?
query provides the 1260-00C with
the information it needs to prepare for executing a
DCIDownLoad
command. This command is
performed separately from the
DCIDownLoad
command so that the download parameters can be
validated before the object code download is
initiated.
The 1260-00C interprets the
DCISetup?
query
parameters as follows:
•
The DCI is to be assigned Logical Address
<logical address>,
and granted to the
Commander at
<Commander's logical
address>
as a Servant.
•
Up to
<number of blocks>
of DCI code and
data are to be loaded into CI RAM area starting
at
<start block>.
•
A stack of size
<stack size>
words is to be
allocated for the CI worker process. If
<stack
size>
is less than 1024, a stack size of 1024
words (2 kilobytes) is to be allocated for the CI.
•
<Servant1>
through
<ServantN>
are to be
granted to the CI as Servants.
Any GPIB address links to
<Servant1>,
<Servant2>
through
<ServantN>
must be
disconnected before the DCI is downloaded. You
can delete the links by using the
SaDisCon
or
LaSaddr
commands.
Response: Program response:
0
<CRLF>
0
is returned to report the successful completion of
the
DCISetup?
command. Any errors are
reported in the form of an error code.
Console response:
DCI parameters OK, Ready to
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com