Rac RAC-04, Руководство пользователя

Страница: 5 / 16

Switching On and Recording
The CarCam is designed in such a way that it will automatically switch on a start
recording the moment it detects a connection to the car electrical system via the in
car power socket. It is important to note however that while some cars provide power
to the in car power socket even when the car ignition is off, other cars require the
ignition to be ON before providing power to the in car power socket.
1. Insert the free end of the Power Adaptor into the in car power socket.
Note: If your car provides power to the in car power socket even when the car ignition
is off, the CarCam will switch on and start recording immediately. If not, proceed to
step 2.
2. Switch on the car ignition. The CarCam will automatically switch on and start
recording.
3. If necessary, loosen the mounting bracket collar and adjust the CarCam to obtain
the optimum viewing angle. Tighten the collar to fix the CarCam securely.
4. The CarCam will continue to record for 10 seconds after the ignition has been
switched off or when the power adaptor is removed from the in car power socket.
5. To Stop recording at any time, press the OK button.
6. To switch OFF the CarCam, press and hold the button for 2 seconds.
7. To switch ON the CarCam (for example, when outside of the car) press and hold
the button for 2 seconds.
8. You can switch on or off the internal microphone by pressing the button once.
Note: If the CarCam is switched on while connected to an external power source, it will
automatically start recording after it is switched on. If the CarCam is switched on
without a connection to an external power source (i.e. using the internal rechargeable
battery only), it will switch on but will NOT start recording automatically.