Rac RAC-04, Руководство пользователя

Страница: 13 / 16

8. Firmware Version
Displays the current firmware version.
Reset Button
Press the reset button to reset the unit in the event of any problems.
Battery
This product uses a Lithium-Ion battery. Do not use it in a humid, wet and / or corrosive
environment. Do not put, store or leave your product in or near a heat source, in a high
temperature location, in strong direct sunlight, in a microwave oven or in a pressurized
container and do not expose it to temperatures over 60°C (140°F). Failure to follow
these guidelines may cause the Lithium-Ion battery to leak acid, become hot, explode
or ignite and cause injury and / or damage. Do not pierce, open or disassemble the
battery. If the battery leaks and you come into contact with leaked fluids, rinse
thoroughly with water and seek medical attention immediately. For safety reasons and
to prolong the lifetime of the battery, charging will not occur at low temperature
(below 0°/32°F) or high (over 45°/110°F) temperatures.
THE LITIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR
DISPOSED OF PROPERLY. USE RAC CARCAM ONLY WITH THE SUPPLIED DC POWER
LEAD AND AC ADAPTER FOR BATTERY CHARGING.
To recycle your RAC CarCam unit, please take it to your local recycling centre.
This product fully satisfies the requirements for CE marking when used in a residential,
commercial or light industrial environment.
This equipment complies with the essential requirements of EU Directive 99/5/EC
Do not use this product on board aircraft, or in hospitals, without first obtaining
permission.