Rac RAC-04, Руководство пользователя

Страница: 3 / 16

Identification of Controls
Buttons and Socket:
Battery Indicator and Charging
Battery Power Indicator
Charging the Battery
The RAC 04 CarCam has a built in Lithium Polymer battery that can be charged while
in use in the vehicle, or outside using the supplied USB cable. The battery will take
approximately 60 minutes to charge and will provide 5 to 10 minutes of emergency
recording time once the power supply has been disconnected.
1. The CarCam will charge when connected to the in car power socket using the
supplied power adaptor cable.
2. Outside of the car, the CarCam can be charged by connecting to a standard USB
charger using the supplied cable.
The Red Power indicator LED will illuminate when the CarCam is being charged. This
LED will switch off when the charging is complete.
Additionally, when switched on and connected to an external power source such as a
USB charger or the in car power socket, the battery level indictor will change to a
charging indicator.
1. Bracket socket
2. Microphone
3. Reset button
4. USB socket
5. Up button
6. Menu button
7. Down button
8. OK button
9. Micro SD card socket
10. Mode / File Lock button
11. Power button
100% charged 75% charged 50% charged 25% charged Low Power
1
3 2
9
8
10
11
5
4
6
7