2. Technical data
Fig.
2
1. Housing
2. Transmission
3. V-belt
4. Hook trestle - 3FS
5. Roller
6. Three-point linkage
7. Slide
8. Slide bars
2.1 Noise prevention
The implement operates at a noise level of 70 – 90 dB. Noise is a
particular hazard when the rear window of the tractor is open. We
therefore strongly recommend the use of hearing protection.
2.2 Options
Depending on the operating conditions, the following cutting implements
can be used:
•
Optional Y-blades (for stalks/trunks of up to 3 cm in diameter)
•
Standard bootee flails (for stalks/trunks of up to 5 cm in diameter)
The maximum diameter of the items being cut depends on the type
and strength of their stalks and trunks. Note that the data given here
correspond to the trunks and stalks of living plants.
The crosscut blade option improves performance, allowing the
mulched material to be broken up into smaller fragments.
3
8
7
2
1
6
5
4