3.5 General safety and accident prevention regulations
1.
You should normally disengage the drive mechanism and switch off the
engine before carrying out maintenance, servicing or cleaning work of any
kind, or before attempting repairs. Always remove the ignition key.
2.
Check all screws and nuts at regular intervals for correct tightness, and
retighten as required.
3.
Insert adequate props and/or axle stands before working on the raised
implement.
4.
Dispose of waste oil, lubricants and filters correctly.
5.
Disconnect the tractor’s alternator and battery before carrying out
electrical welding work on the tractor or attached implement.
6.
All spare parts must conform to the implement manufacturer’s minimum
technical requirements. This is guaranteed by the exclusive use of
ORIGINAL GENUINE PARTS.
