4
RabbitCore RCM3365/RCM3375
1.2 Comparing the RCM3900/RCM3910 and RCM3365/RCM3375
We can no longer obtain certain components for the RCM3365/RCM3375 RabbitCore
modules that support the originally specified -40°C to +70°C temperature range. Instead of
changing the design of the RCM3365/RCM3375 RabbitCore modules to handle available
components specified for the original temperature range, we decided to develop a new
product line — the RCM3900 series.
The RCM3900 series of RabbitCore modules is similar in form, dimensions, and function
to the RCM3365/RCM3375 modules. We strongly recommend that existing RCM3365/
3375 customers and designers of new systems consider using the new RCM3900 series
RabbitCore modules.
This section compares the two lines of RabbitCore modules.
•
Temperature Specifications
— RCM3365/RCM3375 RabbitCore modules manufac-
tured after May, 2008, are specified to operate at 0°C to +70°C. The RCM3900/
RCM3910, rated for -20°C to +85°C, are offered to customers requiring a larger
temperature range after May, 2008.
•
Removable Mass Storage
— The hot-swappable
xD-Picture Card
™ mass storage
device with up to 128MB of memory has been replaced with the
miniSD Card
with up
to 1GB of memory. The
miniSD Card
is more readily available today, and is expected
to remain readily available for a long time. In addition,
miniSD Card
s provide a signif-
icantly larger memory capacity, which has been requested by customers. The trade-off
for the larger memory capacity is that the data transfer rate to/from the
miniSD Card
is
about an order of magnitude slower than to/from the
xD-Picture Card
.
NOTE:
RCM3365/RCM3375 RabbitCore modules may eventually be discontinued
because of changes to the
xD-Picture Card™
.
•
Serial Ports
— Serial Port B, available as either a clocked serial port or an asynchro-
nous serial port on the RCM3365/RCM3375, is used by the RCM3900/RCM3910 as a
clocked serial peripheral interface (SPI) for the
miniSD™ Card
, and is not brought out
for customer use.
•
General-Purpose I/O
— PD2, a configurable I/O pin on the RCM3365/RCM3375, is
used to enable/disable the RabbitNet SPI interface when the RCM3365/RCM3375 is
installed on the Prototyping Board. The RCM3900/RCM3900 use PD2 to detect
whether the
miniSD™ Card
is installed, and so PD2 is not brought out for customer use
on the RCM3900/RCM3910.
•
Maximum Current
— The RCM3365/RCM3375 draws 250 mA vs. the 325 mA
required by the RCM3900/RCM3910.
•
LEDs
— The
SPEED
and user (
USR
/
BSY
)LED locations have been swapped between
the RCM3365/RCM3375 and the RCM3900/RCM3910, the
LNK
/
ACT
LEDs have
been combined to one LED on the RCM3900/RCM3910, and the RCM3900/RCM3910
has an
FDX
/
COL
LED instead of the
FM
LED on the RCM3365/RCM3375. The LED
placements on the boards remain unchanged.
Содержание RCM3365
