Rabbit RabbitCore RCM5400W Скачать руководство пользователя страница 82

Страница: 82 / 120

RabbitCore RCM5400W

6.4 Where Do I Go From Here?

NOTE:

If you purchased your RCM5400W or RCM5450W through a distributor or

through a Rabbit partner, contact the distributor or partner first for technical support.

If there are any problems at this point:

•

Use the Dynamic C

Help

menu to get further assistance with Dynamic C.

•

Check the Rabbit Technical Bulletin Board and forums at

www.rabbit.com/support/bb/

and at

www.rabbit,com/forums/

•

Use the Technical Support e-mail form at

www.rabbit.com/support/

If the sample programs ran fine, you are now ready to go on.

An Introduction to TCP/IP

and the

Dynamic C TCP/IP User’s Manual

.provide

background and reference information on TCP/IP, and are available on the CD and on our

Web site

Содержание RabbitCore RCM5400W

























































































































Результаты поиска

Содержание RabbitCore RCM5400W

Отзывы:

Rabbit RabbitCore RCM5400W, Руководство пользователя, Страница: 82 / 120

Результаты поиска

Содержание RabbitCore RCM5400W

Отзывы: