manualshive.com logo in svg

Rabbit RabbitCore RCM5400W, Руководство пользователя, Страница: 62 / 120

Поделиться
Скачать
Rabbit RabbitCore RCM5400W Скачать руководство пользователя страница 62

56

RabbitCore RCM5400W

access point automatically, which it can do once enabled. Commands issued to the chip set 
in the interface allow a host program to override the default configurations and execute 
functions implemented on the interface cards, for example, scanning for hosts and access 
points.

6.1.2  Ad-Hoc Mode

In the ad-hoc mode, each device can set a channel number and an SSID to communicate 
with. If devices are operating on the same channel and SSID, they can talk with each 
other, much like they would on a wired LAN such as an Ethernet. This works fine for a 
few devices that are statically configured to talk to each other, and no access point is 
needed.

6.1.3  Additional Information

802.11 Wireless Networking

; published by O'Reilly Media, provides further information about 

802.11b wireless networks.

Содержание RabbitCore RCM5400W

























































































































Отзывы:

Нет отзывов