Rabbit RabbitCore RCM5400W Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 120

Rabbit RabbitCore RCM5400W Скачать руководство пользователя страница 59

OEM User’s Manual

53

5.3 Upgrading Dynamic C

Dynamic C patches that focus on bug fixes are available from time to time. Check the Web
site

www.rabbit.com/support/

for the latest patches, workarounds, and bug fixes.

5.3.1 Add-On Modules

Starting with Dynamic C version 10.40, which is included with the RCM5400W Develop-
ment Kit, Dynamic C includes the popular µC/OS-II real-time operating system, point-to-
point protocol (PPP), FAT file system, RabbitWeb, and other select libraries. Rabbit also
offers for purchase the Rabbit Embedded Security Pack featuring the Secure Sockets Layer
(SSL) and a specific Advanced Encryption Standard (AES) library.

In addition to the Web-based technical support included at no extra charge, a one-year
telephone-based technical support subscription is also available for purchase.

Visit our Web site at

for further information and complete documentation.

«
...
57
58
59
60
61
...
»

Содержание RabbitCore RCM5400W

























































































































Отзывы:

Нет отзывов