manualshive.com logo in svg

Rabbit Coyote BL2500, Руководство пользователя

Поделиться
Скачать
Rabbit Coyote BL2500 Скачать руководство пользователя страница 45

User’s Manual

39

4.1.1  Upgrading Dynamic C

4.1.1.1  Patches and Bug Fixes

Dynamic C patches that focus on bug fixes are available from time to time. Check the Web 
site at 

www.rabbit.com/support/

 for the latest patches, workarounds, and bug fixes.

The default installation of a patch or bug fix is to install the file in a directory (folder) dif-
ferent from that of the original Dynamic C installation. Rabbit recommends using a differ-
ent directory so that you can verify the operation of the patch without overwriting the 
existing Dynamic C installation. If you have made any changes to the BIOS or to libraries, 
or if you have programs in the old directory (folder), make these same changes to the 
BIOS or libraries in the new directory containing the patch. Do 

not

 simply copy over an 

entire file since you may overwrite a bug fix. Once you are sure the new patch works 
entirely to your satisfaction, you may retire the existing installation, but keep it available 
to handle legacy applications.

4.1.1.2  Upgrades

Dynamic C installations are designed for use with the board they are included with, and 
are included at no charge as part of our low-cost kits. Dynamic C is a complete software 
development system, but does not include all the Dynamic C features. Rabbit also offers 
add-on Dynamic C modules containing the popular 

C/OS-II real-time operating system, 

as well as PPP, Advanced Encryption Standard (AES), and other select libraries. In addi-
tion to the Web-based technical support included at no extra charge, a one-year telephone-
based technical support module is also available for purchase.

Содержание Coyote BL2500












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды