manualshive.com logo in svg

Rabbit Coyote BL2500, Руководство пользователя

Поделиться
Скачать
Rabbit Coyote BL2500 Скачать руководство пользователя страница 14

8

Coyote (BL2500)

1.4.1  Design Guidelines

Note the following requirements for incorporating the BL2500 series of single-board 
computers into your application to comply with CE requirements.

General

•

The power supply provided with the Tool Kit is for development purposes only. It is the 
customer’s responsibility to provide a CE-compliant power supply for the end-product 
application.

•

When connecting the BL2500 single-board computer to outdoor cables, the customer is 
responsible for providing CE-approved surge/lightning protection.

•

Rabbit recommends placing digital I/O or analog cables that are 3 m or longer in a 
metal conduit to assist in maintaining CE compliance and to conform to good cable 
design practices.

•

When installing or servicing the BL2500, it is the responsibility of the end-user to use 
proper ESD precautions to prevent ESD damage to the BL2500. 

Safety

•

All inputs and outputs to and from the BL2500 series of single-board computers must 
not be connected to voltages exceeding SELV levels (42.4 V AC peak, or 60 V DC).

•

The lithium backup battery circuit on the BL2500 single-board computer has been 
designed to protect the battery from hazardous conditions such as reverse charging and 
excessive current flows. Do not disable the safety features of the design.

1.4.2  Interfacing the BL2500 to Other Devices

Since the BL2500 series of single-board computers is designed to be connected to other 
devices, good EMC practices should be followed to ensure compliance. CE compliance is 
ultimately the responsibility of the integrator. Additional information, tips, and technical 
assistance are available from your authorized Rabbit distributor, and are also available on 
our Web site at 

www.rabbit.com

.

Содержание Coyote BL2500












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды