INSTRUCTIONS
STEALTH STL360 INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
ADJUSTING STL360 SETTINGS (
cont’d)
SENSOR MODES
Evening Timer
(cont’d)
To activate the
EVENING TIMER,
fl ip the wall switch controlling the
sensor three times slowly (off -on-off -on-off -on) within 3 seconds. If
you activate the
EVENING TIMER
during daytime, the middle LED
should start blinking indicating that the
EVENING TIMER
will start
when dusk is detected.
Choose the length of time you want continuous lighting. For exam-
ple, if you set the
EVENING TIMER
to “8”, the sensor will keep lights
ON for 8 hours after dusk. Once 8 hours have passed, the sensor
will revert to motion activated mode. At dawn, the photocell will
detect light and prevent lights from turning on during the daytime.
The Evening Timer Mode will continue until you de-activate it.
If you do not want to use the
EVENING TIMER,
do NOT fl ip the
switch 3 times, as described above.
To de-activate the
EVENING TIMER,
switch the sensor OFF for at
least 10 seconds, then ON again. Sensor will be in Automatic Mode.
(After completing the 30 sec warm-up period)
You can affi x this provided label as shown in Fig. 23 to your indoor
light switch plate for easy reference.
Automatic Mode
Lights will turn on when there is movement within the detection
zone after dusk as shown in Fig 24.
Fig: 23
Fig: 24
Fig: 25
Fig: 26
Evening Timer Mode
Keeps lights on for 1-8 hours after dusk. Sensor then reverts to
Automatic Mode until dawn. If you set the Evening Timer Mode
during daylight the sensor will be prepared to turn on at dusk and
remain on for the number of hours you set.
When the sensor is in
“Ready for Evening Timer Mode”,
the middle
LED will blink 3 times, pause and repeat. Set the Evening Timer
by fl ipping the switch that operates the sensor 3 times within 3
seconds (off -on-off -on-off -on) as shown in Fig 25.
Test Mode
The Test Mode
(Fig 26)
will allow you to test the sensor during the
day regardless of the photocell setting. To enter Test Mode, turn
time setting to 5 sec on the unit. Turn power off for 10 sec then
back on. There is a 30 second warm-up period, then the Test Mode
starts. During the warm-up, the lights stay on continuously and
LEDs are off . During Test Mode the LEDs remain off . The sensor
will stay in Test Mode until the detection zone is vacated for one
minute.
During the Test Period, the sensor will keep lights on for
5 seconds each time it detects movement in its detection zone.
Perform the walk test and make any adjustments needed. Vacate
the detection zone for one minute or more to end Test Mode.
Scanning LEDs will appear when test mode ends. Set back to
desired time setting after testing complete.
SENSOR MODES (
cont’d)
TIME
1 8 HRS
5 SECS 12 MINS
– +
EVENING
TIMER
SENS
RAB
STEALTH360
To Keep Lights On:
Switch off -on-off -on
within 2 seconds. Resets
to Auto Mode at dawn.
To Set
Evening Timer:
To keep lights on for
1-8 hours after dusk, set
the Evening Timer knob
on the sensor, then fl ip
this switch off -on-off -on
within 3 seconds.
To Resume
Auto Mode:
Switch off for 10
seconds, then back on.
“On Guard Auto Mode”
LEDs scan continuously back and forth
“Ready for Evening Timer Mode”
Middle LED blinks