manualshive.com logo in svg

RAB Lightcloud LCGATEWAY, Руководство пользователя

Поделиться
Скачать
RAB Lightcloud LCGATEWAY Скачать руководство пользователя страница 2

EZPAN   EDGELIT PANEL  2X2              

INSTALLATION INSTRUCTIONS

Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. 
Call the Marketing Department at 888-RAB-1000 or email: [email protected]

TM  

CLEANING & MAINTENANCE

CAUTION: Be sure fixture temperature is cool enough to 

touch. Do not clean or maintain while fixture is energized.

1.  Clean acrylic lens & fixture with non-abrasive cleaning 

solution.

2.  Do not open fixture to clean the LEDs.  Do not touch the 

LEDs.

TROUBLESHOOTING

 

1.  Check that the line voltage at fixture is correct. Refer to 

wiring directions.

2.  Is the fixture grounded properly?

0-10V DIMMABLE WIRING

Universal voltage driver permits operation at 100V thru 

277V, 50 or 60 Hz. 0-10V control wires must be rated for 

300V minimum. Terminal  block  accepts  input  power  wires                   

of 16-18 AWG.
1.  Connect LINE supply lead to (L) marked on Terminal Block.
2.  Connect COMMON supply lead to (N) marked on Terminal 

Block.

3.  Connect the GROUND wire to pre-installed Push-in 

Connector.

4.   Connect  DIM+ lead to (DIM+) marked on Terminal Block.
5.  Connect DIM- lead to (DIM-) marked on Terminal Block.

Easy Installation & Product Help

Tech Help Line

Call our experts 888 RAB-1000

©2016 RAB LIGHTING Inc.

Northvale, New Jersey 07647 USA

rabweb.com

Visit our website for product info

email

Answered promptly [email protected]

Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation 
or maintenance.

EZPAN EDGELIT PANEL  2X2  0616

For 12-14 AWG wire, insert supplied 16 AWG Pigtail wires into 

Terminal Block.
1.  Connect LINE supply lead to Black Pigtail with wire nut 

supplied.

2.  Connect COMMON supply lead to white Pigtail with wire 

nut supplied.

3.  Connect the GROUND wire to Green Pigtail with wire nut 

supplied.

4.   Connect  DIM+ lead to (DIM+) marked on Terminal Block.
5.  Connect DIM- lead to (DIM-) marked on Terminal Block.

Содержание Lightcloud LCGATEWAY




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды