INSTRUCTIONS
HALV Indoor Architectural-Grade LED Wall Sconce
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
FIG.3
Wall box is installed before sheetrock
.
1. Remove
Driver/LED/Wall plate
assembly by loosening
4 phillips head screws as shown in
Figure 1
. No need to
completely remove screws, keyhole slots provided. Retain
Hanger
. Unplug connectors (if E2, E2/MVS, E2, E2/BL, or E2/LC)
and put Driver/LED/Wall plate aside.
2. Install
Nailer Bars
into wall box as shown in
Figure 2
.
3. Locate the wall box in the desired position between the studs
and affix using
Nailer Bars
.
4. Tighten 1 phillips head locating screw shown in Figure 2 to hold
wall box in position on the
Nailer Bars
.
5. Run wire to box.
Wall box is installed after sheetrock.
1. Remove
Driver/LED/Wall plate
assembly by loosening
4 phillips head screws as shown in
Figure 1
. No need to
completely remove screws, keyhole slots provided. Retain
Hanger
. Unplug connectors (if E2, E2/MVS, E2, E2/BL, or LC/E2)
and put Driver/LED/Wall plate aside.
2. Discard
Nailer Bars
.
3. Move
Stop Brackets
from end to side and add
Sheetrock
Clamps
as shown in
Figure 3
(on following page).
4. Using the template provided, cut opening in sheetrock. Leave
at least ¾” between box and stud.
5. Run wire to box.
6. Place
Wall Box
in opening and tighten 4 phillips head screws
to secure
Wall Box
.
FIG.1
`
FIG.2
Hanger
Sheetrock Clamp
Stop Bracket
after relocation.
Move both
Stop Bracket screw
after relocation
Stop Bracket
before relocation
Stop Bracket screw
before relocation
Nailer Bar
Tighten to secure
in sheetrock
Hanger
Driver/LED/Wall
plate assembly
DO NOT TOUCH LEDs
Insert
screwdriver
though hole to
loosen screw
4 places
Hanger
Nailer bar
Stop Bracket
Discard for new
work install
Tighten this locating screw
to hold box in place
NEW CONSTRUCTION INSTALLATION
(models w/wall box)
REMODELER INSTALLATION
(models w/wall box)
Содержание HALV
Страница 5: ......
