background image

Features

OCCUPANCY & VACANCY SENSING: 

The Lightcloud Sensor can operate in either Occupancy or Vacancy Sensor 
modes, selectable via the Lightcloud application. In Occupancy mode, the attached 
circuit will be switched on when motion is detected, and off (or dimmed) when the 
timeout expires. In Vacancy mode, the attached circuit will be turned off when the 
motion timeout expires, but will only be turned on via the Lightcloud application, 
Lightcloud Wall Switch, or similar. Motion detection and timeout can still be used 
via Lightcloud Automations to control other devices.

CONTROLLER MODE: 

In Controller Mode, the attached circuit is controllable as an independent zone 
in the Lightcloud application. Motion detection and timeout can still be used via 
Lightcloud Automations to control other devices. 

RANGE TEST MODE: 

When Range Test Mode is activated via the Lightcloud application, the timeout 
period is shortened so that you can test different sensitivities quickly. All indicators 
will go off except for the Motion Indicator. When satisfied, turn off Range Test 
Mode to continue normal operation.

Functionality

 (cont’d)

Features: Passive Infrared Motion Detection

SIDE VIEW

SIDE VIEW

TOP VIEW

TOP VIEW

 

15’

7.5’

7.5’

15’

30’

9’

0’

0’

7.5’

7.5’

15’

15’

CEILING SENSOR

 

20’

14’

14’

20’

40’

30’

0’

0’

14’

14’

20’

20’

HIGH BAY SENSOR

Содержание Lightcloud LCHBSENSE15/D10











Отзывы: