Maximum Energy Savings:
■
Sensitive 180° view passive infrared
motion detector keeps lights on only
when rooms are in use.
■
No ON switch so lights are never
left on by mistake.
■
Meets new energy code standards.
■
Meets California Title 24.
■
Suitable for all utility rebate
programs.
Maximum Coverage:
■
180° wide angle detection pattern.
■
Picks up people entering
doorways quickly with standard next
to doorway location.
■
Covers 1000 square feet, eliminates
need for multiple sensors.
■
Superb small movement sensitivity
within 18 feet. Great for sedentary
office use.
■
No dead spots with 18 sensing
fingers.
Maximum Reliability:
■
“ZAP” (Zero Arc Point) Sensor
switches only at the zero arc point
of an electrical cycle. Protects
relay contacts from high inrush and
kickback currects and lengthens
ballast and sensor life
.
Features
:
Easy Installation:
■
Works with dimmers and
programmed rapid start electronic
ballasts.
■
No minimum load requirement.
■
Replaces single pole wall switches
without additional wiring.
■
Fits decorator style, rectangular
opening switchplates.
■
Only 1/2” protrusion from switch
plate.
■
No adjustments required for most
installations.
■
Compact design fits standard switch
boxes with plenty of room for wiring.
■
LED Detection Indicator aids walk
testing and adjustments.
■
30 second minimum delay time
speeds testing procedure.
■
Tamperproof control panel cover
reduces callbacks for tampering.
Maximum Versatility:
■
Switches most types of fluorescent
and/or incandescent lighting.
Instant Start fluorescent ballasts
may not be rated for use with any
kind of occupancy sensor.
■
Fits single or multi-gang locations
without special adapters.
■
Wide time delay choice adjust to
active or sedentary movement.
■
Does not interfere with computers.
■
Superior RF immunity.
Specifications:
Coverage:
1
000 square feet,
up to 35’ from the sensor.
Detection Zone:
180° in 18 zones
32’ range
Vertical beam 5” wide
Detection Pattern:
Note:
Detection of sedentary small
movement desk work within 18’
Time Adjustment:
30 seconds to 30 minutes
after motion stops
Detection Indicator:
Red LED
Energy Codes:
Meets new energy code standards.
Complies with California Title 24
Switching Capacity:
120 VAC: Max 1000W ballast
Max 800W incandescent
60 Hz, 1/8 HP
277 VAC: Max 1800W ballast
60Hz, 1/8 HP
Minimum Load:
None
Power Consumption:
Less than 500 microamps
Wiring:
Replaces single pole wall switch,
2 wire system
Temperature Range:
-30° to + 122°F
(-1° to + 50°C)
Humidity Range:
20% to 90% non-condensing
Approvals:
UL Listed
Appliance Control Specification Grade
UL Standard 508
Industrial Control Equipment
Weight:
8 ounces (266 grams)
Parts List:
LOS1000 Sensor
Matching wall plate
2 matching wall plate screws
Bypass key
Dimensions:
A = 4.06”(103mm) B = 1.69”(43mm)
C = 2.25” (57mm) D = 2.56” (65mm)
E = 1.25” (32mm) F = 5”(13mm)
G = 1.68” (43mm)
32’
4’
32’
50’
A D
B
E
C
G
F
2
3
