RAB Lighting FXLED, Руководство по установке

Страница: 77 / 82

Setup & Installation
(cont’d)
DEVICE IDs
3
Labeling your device
For setup and maintenance, we provide two Lightcloud Device Tables with
the Gateway: one that you can attach to your panel and one to hand off to
a building manager. Attach the Device Identification stickers included with
each device to a row, then write in additional information, such as Zone
name, Panel/Circuit Number, and whether or not a zone uses dimming.
ZONE NAME
PANEL/
CIRCUIT #
INSTALL AT A JUNCTION BOX (INDOOR/OUTDOOR)
The Ceiling Sensor can control other Lightcloud devices, wirelessly.
If you don’t need to hard-wire a switched circuit to the Sensor,
no problem—just tie the white/red wire to neutral and cap off any
unused wires.
2
Install your Lightcloud Ceiling Sensor
Sensor attached
attached to wired
junction box