R82 Panther Скачать руководство пользователя

Страница: 35 / 40

FOR CARRIAGE

ON PUBLIC

TRANSPORT

In accordance with Direktive 2001/85/EG, An-

nex VII, item 3.8.3, the vehicle includes spe-

cially marked wheelchair locations, permitting

transport with the wheelchair facing the forward

direction of movement.

If this method of transport is utilised, the user or

carer must play an active part in the travel, be

prepared for rapid movements, and the ability

to maintain a secure seated position throughout

the entire period of transport.

The restrictions on movement of the user must

not be so great as to prevent him/her from hol-

ding on to the handholds installed in the vehicle

during changes in speed and direction of the

vehicle.

Apart from the above, one should be able, in

order to improve safety, to check that:

- The backrest is at the same level as, or above,

the user’s shoulders

- That neck support is used and is correctly

fitted.

- That the parking brake is applied

- That the tipping protection is lowered

Содержание Panther








































Результаты поиска

Содержание Panther

Отзывы:

Похожие инструкции для Panther

Бренды по названию

Популярные бренды

R82 Panther, Руководство пользователя

Результаты поиска

Содержание Panther

Отзывы:

Похожие инструкции для Panther

Бренды по названию

Популярные бренды