R82 Panther страница 33 Скачать руководство пользователя

Страница: 33 / 40

TRANSPORTATION

IN MOTOR VEHICLES 1/2

The Panther wheelchair is approved for trans-

porting children in motor vehicles, when the

wheelchair is placed in forward-facing position.

The approval is not valid on special made

wheelchairs.

Follow the below to ensure the safety:

The child should transfer to the vehicle

seat and use the vehicle-installed restraint

system whenever it is feasible.

The wheelchair has been dynamically te-

sted accoridng to ANSI/RESNA WC/Vol.

1-1998, section 6.4.1, litra c.

The wheelchair must be placed in forward-

facing position, when used as a seat in a

motor vehicle. Use an approved 4-point

strap-type tiedown system.

Use an approved 3-point belt in the wheel-

chair. Restraints should not be held away

from the body by wheelchair components

such as armrests or wheels.

All accessories has to be removed from

the wheelchair and secured separately in

the vehicle. Accessories which can not be

removed, has to be secured to the wheel-

chair but positioned away from the child with

energy-absorbing padding placed between

the accessories and the child.

The wheelchair should be inspected by the

dealer before reuse following involvement

in any type of vehicle impact.

Restraints should

not be held

away from body

by wheelchair

components such

as armrests or

wheels

Содержание Panther








































Результаты поиска

Содержание Panther

Отзывы:

Похожие инструкции для Panther

Бренды по названию

Популярные бренды

R82 Panther, Руководство пользователя

Результаты поиска

Содержание Panther

Отзывы:

Похожие инструкции для Panther

Бренды по названию

Популярные бренды