22
A
C
B
D
E
N
G
L
I
S
H
HEAD SUPPORT AND
HELPER'S HANDLE
The Planar Back is designed ready to receive
head support and helper's handle.
* The head support or the helper's handle is
mounted in the fitting (A) on the back of the
chair. Fasten when mounted.
Use the enclosed fitting (B) when both the head
support and the helper's handle have to be
mounted.
* Use the enclosed 3 mm Allen key to fasten
the fitting on the head support bar (C).
* The head support is mounted on the back of
the chair.
* Use the enclosed 3 mm Allen key to fasten
the push handle in the fitting (D).
Be carefull not to get your fingers caught
when adjusting the height and depth of the
head support.
Do not ever use the helpers handle to lift/
pull the wheelchair up or down from stairs,
landings, curbs ect. The wheelchair can
only be lifted by two persons grabbing hold
of the frame. Never use the helpers handle
to lift the wheelchair.
