无锡人人行拍网络科技有限公司
13
5. Bind and Frequency switch
5.1 Bind
Function description: Bind one transmitter with one receiver and gives the pair the matching ID code.
Operation method: the device LED light shows correctly, press BIND buttons on transmitter and
receiver at the same time and keep more than 5 seconds, all the LED light will turn off, then release the
button. All the LED light will flash one by one regularly, means the device start the bind progress. When all
the LED lights of both sides shows correctly that means bind progress is finished. The full process will
take 1-2 mins.
Attention:
When the Transmitter is connecting with the receiver, the video will be paused two times during the
bind progress, the video will work correctly when the progress is finished.
One Transmitter only work together with the bind receiver after processed the bind function. Bind
progress should be worked on the Transmitter and receiver at same time, please turn off other devices
during bind progress in order to avoid mismatching errors.
All the buttons on the Transmitter and receiver will be worked after the device started 50 seconds
later, the LED lights flash high speed means the buttons are not available now.
5.2 Frequency switch
Press the FREQ button of the receiver more than 5 seconds, all lights are turn-off, release the key, all
lights flash. The screen return to normal display after 5 seconds, that means frequency switch finished.
The frequency which displays on the monitor will switch to the next one.
