R2 MT 125, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 20

7 7
ENGLISH
6- Components assembly and coupling of the working equipment.
(*note 5 mod. hi)
Note: all the components that make part of the machine and that must be assembled before using it,
have been designed to minimize the user’s work ; the parts should be assembled using hand tools
(wrenches).
The assembly must be made on a steady surface or on an
homogeneous level floor. During the assembly wear
leather gloves and accident-prevention shoes.
6.1 Roller group and roller adjustment rod assembly.
Put the roller group screwing the two arms (Fig. 5 – Ref. A) in the holes that you will find in the back
part of the power harrow. (Fig. 5 – Ref. B).
Screw the roller adjustment rod (Fig. 5 – Ref. C) in the points indicated on the roller support (Fig. 5 –
Ref. D ) and in the power harrow (Fig.5 – Ref. E).
NOTE: the screws used to fit the roller group and the roller adjustment rod must be well tightened in
order that all the elements can turn during the adjustment.
6.2 Flange assembly and coupling of the machine to the walking tractor or tractor.
Before fitting the machine flange (Fig. 5 - Ref. F), which varies according to the model of the walking
tractor, we advise you to apply some grease on th external diameter of the machine hub (Fig. 5 -
Ref. G) in order that the machine oscillates . Fit in the flange with two special screws (grub screws)
(Fig.5-Ref. H) and two muts; in order to fix the flange on the hub do as follows:
- Screw the grub screws completely and then turn back of one turn, close the nuts and tighten.
Once you have finished, check that the flange oscillates freely without tightening or seizing,
otherwise repeat all again.
- Put the transmission sleeve (Fig. 5 - Ref. I) on the machine shaft previously lubricated.
Afterwards, bring the walking tractor near to the machine paying attention that the sleeve
engages with the connecting-shaft of the walking tractor and that the two flanges, the one of
the walking tractor and the one of the machine, fit perfectly well; then tighten the machine
with the rods of the walking tractor or tractor.
Fig. 5
A
C
A
D
E
B
F
G
H
I