R1 WURKS Digital-3, Руководство пользователя

Страница: 3 / 3

Connection between WIFI ADAPTOR TELEMETRY and
ESC
5. WIFI ADAPTOR TELEMETRY SETTING
< WIFI ADAPTOR TELEMETRY application and connected WiFi ID>

R1WURKS_XXXX is individual WiFi module ID, and it can vary depending on products. Choose the
detected R1WURKS_XXXX WiFi.

Switch on “WiFi” setting in a smart phone.

Then, choose R1WURKS_(XXXX) at WiFi, then password box appears.

Initial WiFi password is 1234567890. Insert the password then check WiFi connection.

Once it is connected, click on “R1 WURKS DIGITAL-3” APP in a smart phone. Once APP start screen is
pressed, it should move into a main screen.

Click at the right bottom of the main screen, then select WiFi item. Change WiFi name(SSID) and
password as other customers can also use the provided initial ID and password. Reset WiFi and connect to
avoid any confusion.

After changing name or password of R1WURKS, research again WiFi then set and proceed.

In case you forget the password, please update WIFI ADAPTOR TELEMETRY then set WiFi and proceed.
After this wired update, WIFI ADAPTOR TELEMETRY module is initialized. Please refer to the homepage on
the detailed operation.

After all of the above procedures are executed, overall setup on WIFI ADAPTOR TELEMETRY is complete.
6. LED Status (LED status)

YELLOW LED is ON : WiFi module is ON

YELLOW LED flashes : WiFi module is OFF

RED LED flashes : Command comes from smart phone

RED LED is ON : WIFI ADAPTOR TELEMETRY is being updated in wired condition.

RED LED flashes three times : Initialization is complete. Default ID and password are set.