R1 WURKS Digital-3, Руководство пользователя

Страница: 2 / 3

Thanks for purchasing R1 WURKS WIFI ADAPTOR TELEMETRY. Please carefully read this instruction manual
before using this unit.
1.
Introduction
This R1 WURKS WIFI ADAPTOR TELEMETRY is connected to ESC and smart device like android, i-phone,
tablet pc and program can be set with wireless system. You can also check actual racing data in real time, and
racing information up to 50 minutes can be stored so that users can easily find and know the character of the
driving.
2. Specifications

Operating voltage: 5~7.4V

WiFi protocol: IEEE 802.11/b/g/n

WiFi valid signal range: (0~10m, depending RF status)

Size: 25 x 25 x 9 mm (L x W x H)

Weight: 7g

WiFi SSID: R1WURKS_XXXX (MAC Address 4 digits)

WiFi Password: 1234567890
3. Features

Wireless Programming: Easy to set ESC program such as Power Curve, Brake, Turbo/Boost timing, etc via
smart device.

Live function: Easy to check real driving data such as RPM/Voltage/Current/Consumed battery via Live

Log View / Stopwatch: This is to store driving data for max 50min, and user can store/recall then see the
driving performance.

Wireless Firmware Update: User can easily update ESC/ R1 WURKS WIFI ADAPTOR TELEMETRY via
smart device.

WiFi is On and Off according to monitor operation to minimize interference to a receiver.
4. User Guide

How to connect WIFI ADAPTOR TELEMETRY

Download R1 WURKS DIGITAL-3 ESC app then install.

Like figure below, the signal of connection location for WIFI ADAPTOR TELEMETRY and ESC setting should
be connected with 3 pins white band of WiFi.

Connect the ESC to Power then switches on the ESC. Once WiFi works, the Yellow LED on the WIFI
ADAPTOR TELEMETRY should flash. Then, refer to “WIFI ADAPTOR TELEMETRY – Setup item”

To minimize the impact of WiFi to a receiver, WiFi module should be placed far from an antenna on a
receiver.