R.V.R. Elettronica URPR/ MIC, Руководство пользователя

Страница: 32 / 48

28
/ 42 User Manual Rev. 1.0 - 29/06/12
URPT/MIC & URPR/MIC
ELETTRONICA
5.4.4 Setup Menu (Set)
This menu lets you view and set operating frequency.
Menu 7
F1
Operating frequency setup. Set a new frequency value and then press the
ENTER button to confirm your selection; the exciter unlocks from current
frequency (the
LOCK
LED turns off) and will lock to the new operating
frequency (
LOCK
turns back on again).
If you press
ESC
or let the preset time time out, the previous frequency
setting is retained.
Clp
Enables (ON) or disables (OFF) the clipper.
Aux
Enables (ON) or disables (OFF) the external audio, if present.
Enc
Enables (ON) or disables (OFF) the sub-tone of control at 27 Hz.
PB
Adjusting of the frequency value of the low pass filter, expressed in
kHz.
Pre
Adjusting of the pre-emphasis value, expressed in µS.
ALC
Enables (ON) or disables (OFF) the automatic level control.
NOTE: Aux input, if enabled, disables the INP/4 XLR frontal connector and the
audio is applied to pin 4 and 5 of ACCESSORY connector; the regulations related
to this input are carried out with commands of INP/4 frontal input.