R.V.R. Elettronica TX20000U-KLC, Руководство пользователя и техническое руководство

Страница: 22 / 248

ELETTRONICA
TX20000U-KLC
User & Technical Manual
Rev. 2.0 14/05/2015
16
5.1.5 Menù R.F. Combiner
This menu contains the information related to the RF part of the complete transmitter.
(Figure 5-6).
Menu Line Description
Fwd Overall emitted RF power of the transmitter
Rfl Reflected RF power of the antenna
Fwd (External) Forward power of an external transmitter (when configured for this
function)
C.B. Kdj 1-10 Temperature sensor of the dummy load. Alr indicates an excessive
temperature
C.B. Kdj-M Temperature sensor of the dummy load (big load) Alr indicates an
excessive temperature (only in the transmiter TX20000U-KLC)
Ext.Alarm External alarm for future protections
S.W.R. Standing Wave Ratio, calculated by the Control Unit on the basis
of the measured forward and reflected power
Main Exc Output power of the exciter currently on air (the one connected to
the input of the RF modules)
Stby Exc Output power of the exciter currently on the internal dummy load
Blower.Kdj Status of the output for kdj fan (dummy load)
Blower.C Status of the output for extraction air fan
PWG1 Fwd.P Status of the output “PWG1”. See the Settings Menu
PWG2 Fwd.P Status of the output “PWG2”. See the Settings Menu
PWG3 Rfl.P Status of the output “PWG3”. See the Settings Menu
PWG4 Rfl.P Status of the output “PWG4”. See the Settings Menu
In the angle low to right of the display the symbol is present this means that
an ulterior relative page to this menu is available (Figure 5-7),that it is possible to visuali-
ze using the key-arrow.
Menu Line Description
Power: Kdj-1 Foward RF power on dummy load n°1
Temp: Temperature of the dummy load n°1
Power: Kdj-2 Foward RF power on dummy load n°2
Figure 5-5