18
/ 20
User Manual
Rev. 1.0 - 28/10/16
TX05KSS/61D082B & TX05KSS/61S082
| |RF :On | |
| |Freq. :000.000Mhz| |
| |F.Step:000 kHz| |
| |P.Out :000 % | |
| |Rise
t
:000
Sec
| |
| |FWD : 0.0 W | |
| |RFL : 0.0 W | |
| |
Admin
---[Exit]---| |
Select the
FREQ
field (working frequency), rotate the encoder and then press
it to enter in modality of parameter modification.
Adjust the frequency by turning the encoder. Note that when you press the encoder
to store the new frequency, the software requires confirmation about this value
(“Are you sure?”). Highlighting the “Yes” field, and pressing the encoder, the choice
will be confirmed.
•
To adjust the desired
working power
do the following operations:
Select Admin/
Admin/
MAIN
(RFset) menu, rotate the encoder
, rotate the encoder and then press it to enter
in the submenu.
| |RF :On | |
| |Freq. :000.000Mhz| |
| |F.Step:000 kHz| |
| |P.Out :000 % | |
| |Rise
t
:000
Sec
| |
| |FWD : 0.0 W | |
| |RFL : 0.0 W | |
| |
Admin
---[Exit]---| |
Select the FWD field (reading and adjustment of delivered power), rotate the
encoder and then press it to enter in modality of parameter modification.
The reading is expressed in Watt, while the adjusted value is expressed as a
percentage of maximum power. Pressing the encoder when the cursor is on this
option, the unit indicator of measurement changes from “W” to “%”, and turning
the encoder you can set the percentage value. Pressing the encoder the
new value is stored.
• To adjust the desired audio input do the following operations:
Select the Admin/
BdSet
(audio board adjusment), rotate the encoder and then
press it to enter in submenu.
