TX05KSS/61D082B & TX05KSS/61S082
5
/ 20
User Manual
Rev. 1.0 - 28/10/16
5. Installation and Use
This chapter contains the basic instructions for installing and using both the
TX05KSS/61D082B
and the
TX05KSS/61S082
. If necessary, more depth
information about the operating principles may be found in the components’
manuals.
5.1 Installation
For practical reasons and for transport safety, the machine can be supplied
disassembled to the customer. The assembly procedure is rather simple and can
be carried out by any qualified technician.
Note:
In order to avoid the risk of damaging the machine and/or of injuring the
operators, it is advisable to closely adhere to the instructions provided below.
always respect all the safety regulations and standards in force.
Unpack the transmitter and before any other operation check that the equipments
hasn’t been damaged during transport and all the controls and connectors on the
front and rear panels are in good condition.
To install both the
TX05KSS/61D082B
and the
TX05KSS/61S082
transmitter
please refer to the relative technical dossier, particularily about:
• Mains supply connection
• RF connections
• Audio connections
Perform the connections following the instructions and schematics given in the
station’s documentation (technical dossier).
Install the rack in the point in which the transmitter will be put in operation. The
rack is mounted on wheels for easy movement so that, once placed in the desired
location, it is advisable to use the four screws located at the base of the rack to
stabilize it perpendicularly to ground.
The transmitter normally have the outlet air iin the back of machine.
