![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/pj10kps-ca/pj10kps-ca_users-and-technical-manual_3058802209.webp)
PJ10KPS-CA
User & Technical Manual
203
Operation Result
Turn the “Mains” switch The whole transmitter is powered. The machine is activated in the same
status it was in when it was turned off the last time
Press the OFF key of the control unit
RF emission by the transmitter is inhibited; the exciters are off; the RF
amplifier modules are off
Press the EXCITER CHANGEOVER key of the control unit
The automatic management for the exciters changeover is disabled.
The MANUAL LED must be on (otherwise press the key again)
Press the STDBY key of the control unit
The exciters are turned on in interlock status. The RF amplifying
modules stay disabled. Being in manual modality, the exciters could be
unlocked to verify the operation (see 8.5).
Set the parameters of the control unit
This procedure is described in chapter 5 on in this manual. The control
unit communicates the nominal power and reduced power values to the
RF modules. It also handles the coaxial relays so that the on air exciter
is the desired one and sets the exciter to ON mode
Set the exciters
Adhere to the instructions of the exciters used for setting the required
work frequency on the exciters. Regulate the output power of the
exciters to 20 W.
Press POWER LOWER and ON
The current exciter is activated (the interlock is released from the
exciter) and its power emission is enabled. The power emitted by the
PJ10KPS-CA amplifier increases gradually until it attains the level that
had been set previously as “Reduced power”. Check the emitted power
level by means of the analog instrument with the selector switched to
FWD PWR position
Press NOMINAL POWER
Power supplied by PJ10KPS-CA increases and attains the set nominal
value. Check it on the analog instrument.
When the transmitter is on and works at its nominal power, the whole series of
“accessory” checks and settings deemed necessary may be carried out before
starting up the apparatus.
8.5 Control unit settings
The settings of the control unit that are required for starting up the machine,
mentioned in the powering-on procedure, are the following:
1. Setting of the power levels
2. Setting of the on air exciter
Before performing the first operation, click the ESC and OK button. The display
shows the screenful for selecting the menus [Figure 5-7]. Click the arrow keys
until the cursor highlights the line associated with the Setting menu. Click OK: the
software will show the associated screenful on the display [Figure 5-8].
8.4 Power-on
When powering-on the transmitter the first time, perform the operations outlined in
the table below.
The “Result” column indicates the immediate results of the operations performed
plus a few indications that confirm that the machine is working efficiently.
Should any inconsistencies occur as compared to these indications, interrupt the
procedure and identify the reason for the malfunction before resuming the procedure.
Содержание PJ10KPS-CA
