R.V.R. Elettronica PJ10KPS-CA, Руководство пользователя и техническое руководство, Страница: 34 / 218

28
User & Technical Manual
PJ10KPS-CA
Figure 5-11
5.1.10 Exciters menu
This menu is used to configure the settings of the exciters (Figure 5-12).
Menu Line Description
Main Exc Output power of the exciter currently on air
Stdby Exc Output power of the exciter currently on the internal dummy load
Main Exciter Visualization of the “on air” exciter. When positioning the cursor on
this line, with the arrow buttons and by pressing Enter, it is possible
to operate the switching between the on air exciter and the exciter
on dummy load.
Exct.1 Status of the exciter 1. By positioning the cursor on this line with the
arrow buttons and by pressing Enter it is possible to switch on and
off the exciter.
Exct.2 Same as Exct.1 for the second exciter
Figure 5-12
Note: the exchange of the exciter and the relative cursor are available only if the logic of
exchange is set to manual and the yellow LED is lit.