22
/ 32
User Manual
Rev. 1.0 - 29/11/12
TEX30/50/100/150/300LCD
ELETTRONICA
5.5 Optional Function
A range of options is available for the product to add certain functions and/or modify
existing functions. Outlined below are the functions available at the moment, which
must be specified on order.
5.5.1 FSK Option
The FSK function generates periodic carrier frequency shifts to generate a
Morsecoded station ID code.
NOTE:
This function is typically used in the USA.
The factory setting for frequency shift is +10KHz and code repetition period is 60
minutes (please contact R.V.R. Elettronica if you need different settings), whereas
station identified may be programmed by the user following the indications provided
in section below.
When the FSK option is fitted, an FSK submenu is added to the
selection
menu
.
Menu 11
Press the
ENTER
key when FSK is highlighted in the
selection menu
to access
the FSK submenu:
Menu 12
FSK
Enables / disables FSK code transmission.
Cod
Shows the Morse code sent normally.
5.5.1.1 Changing the ID code
User may change the FSK code used as a station identifier at any time.
This procedure requires:
• 1 RS232 male-female cable;
• Hyper Terminal interface (make sure it has been installed together with
Windows®) or equivalent serial communication software.
