14
/ 30
User Manual
Rev. 2.0 - 17/02/17
SCML1+1SL ( /V1, /V2 , /V3 & /V4 )
ELETTRONICA
5.2 Management Firmware
The following is a representation of the main screen, available once you switch on
the equipment or when after 180s the encoder is not used, and gives to the user
information about the status of the system.
TX1:ON TX2:Off
CF8 Retry 05/10
The main screen shows information regards the status of TX and the number of
automatic retry, moreover is present an hourglass that indicates:
1. Start time presence, if is the only icon present;
icon present;
2. Exchange time presence, if the icon is combined with
icon is combined with icon.
The icon identifies a temporary suspension of the exchange automatism and
icon identifies a temporary suspension of the exchange automatism and
appears when:
1. The SCM is in ALARM status.
2. One TX is in LOCAL condition.
3. The total number of Retry is 0.
4. The number of makes Retry is the same to the number of total Retry.
5. In Gold configuration the PA connected gives the interlock.
By pressing the encoder you see all the menu available, turning through the
“►” symbol you can chooses it and by pressing you can access to its inside.
After ~20s you return to the main screen in case the encoder is not used.
Ź
General Setting
TX1 Setting
TX1 Setting
Change Setting
Function Status
Soft. Version
Exit
