R-Tech TIG200PDC, Руководство по эксплуатации

Страница: 9 / 21

Connections for TIG (GTAW) Welding
Fig 2
1 Negative power connector
connect Tig Torch Dinze to power connector by inserting and twisting until tight
2 Gas outlet
Connect the torch gas hose
3 Positive power con
Connect the earth lead to by inserting and twisting until tight and the earth clamp to work/
bench
4. Torch control socket 7-Pin
Connect torch control plug
To avoid a High Frequency shock keep the Tig torch in good condition and replace if any of the
insulation is damaged.
Connect the gas input hose to gas regulator and use 'Pure Argon' Gas, available from local suppliers.
Set gas flow/pressure to 8-12 LPM.
Make sure gas bottle is secured to avoid injury.
9