20
RECOMMENDED SETTINGS
OK will now turn RED, RECOMMENDED SETTINGS will now be loaded for you.
Welding amps
-
shown in middle of display
Post flow gas time
-
not shown
The display will also show recommended
Gas flow in LPM (set this on regulator or gas flow meter)
Torch cup ceramic size (If not to hand, you can use a larger size)
You are now ready to weld! Press trigger or foot pedal to weld.
If you want to change any settings, just simply use left / right arrows to highlight setting in red
and use control knob to change
-
then use arrows to move to OK to update.
AMPERAGE TRIM
You have 10A trim +/
-
of recommended amperage, simply turn knob to decrease / increase amperage.
This is to allow fine tuning to personal preferences like travel speed, weld bead appearance.
70
90
