R-Tech PLASMA 60HF, Руководство по эксплуатации

Страница: 4 / 19

4
Introduction
The R-Tech Plasma 60HF is a member of our field acclaimed family of welding products.
Premium features include:
-
1. Inverter power source – more efficient to operate, provides smoother weld
characteristics.
2. Infinite cutting power adjustment, allows fine tuning of cut characteristics
3. HF Pilot start – Enables easy arc start even on painted surfaces
4. HF pilot arc restart – ideal for cutting mesh etc
5. Digital amp meters
6. Quick fitting torch for easy torch fitment/replacement
7. Long life – Low cost torch consumables
8. 60% Duty cycle at 40 Amps @ 40
º
C
Recommended Processes
The R-Tech Plasma 60HF is recommended for the plasma cutting processes within its output
capacity of 60 Amps DC
Equipment Limitations
The R-Tech Plasma 60HF is protected from overloads beyond the output ratings and duty cycle
as per machine specifications with thermostat protection of the output coils and rectifiers.
Cutting Capability – Duty Cycle
The R-Tech Plasma 60HF is rated at 60 Amps at 60% duty cycle on a ten minute basis. If the
duty cycle is exceeded a thermal protector will shut machine off until the machine cools.
Technical Specifications
MODEL PLASMA 60HF
Power Voltage
415V 3-Phase 50/60Hz
Input Current 12.5A
Rated Output Current 60 Amps
Current Adjusting Range 20-60 Amps
No-load Voltage 200V
Rated Duty Cycle 60%
Working Mode HF Start
Air Pressure 55 PSI
Max. Cutting Thickness (Clean cut mild steel) 17mm
Max. Cutting Thickness (Severance cut mild steel) 25mm
After Flow Time 10 Seconds
Dimensions / Weight 620x260x550 mm / 30KG